Make water part of your terrace.
A patio fountain shapes the space around it. Its basin, fountain body, splash zone and surrounding walkways form a single composition. Choosing one means looking beyond material and shape to its footprint, weight, sightlines, sound and access for maintenance.
A traditional garden fountain often relies on a reservoir buried in the ground. A patio water feature needs a different approach: it sits among paving, decking, sightlines, walls and seating areas used at close quarters.
In the selected Revisage models, the water reservoir is usually integrated into a visible basin, trough or architectural enclosure. Each feature stands on the finished surface and recirculates its water, allowing installation without extensive excavation. The requirements still vary by model: even a system prepared for operation needs a safe electricity supply, a level base and careful planning for its weight and splash zone.
Suitability for a paved patio does not automatically mean a fountain can be installed on a balcony or roof terrace. Before positioning stone or steel features weighing several hundred kilograms when filled, check the structure's load capacity, emergency drainage, wind exposure and building rules separately.
The basin is part of the design. It defines the feature's physical footprint and does not need to be sunk into the ground.
An adjustable pump recirculates the water in the basin. A permanent mains water connection is not essential for operation.
The fountain body's height, basin width, drop height and exposure to wind determine how close seating and walkways can be placed.
Access openings keep the pump, water distributor and supply connections within reach, without dismantling the fountain.
Catalogue dimensions describe the physical feature. On a patio in everyday use, allow for the spaces around it too: the splash zone, circulation routes and a comfortable distance from seating.
The main body, such as a 50 × 50 cm stainless steel cube or a stone column, from which water emerges and flows down.
A visible collecting basin, for example 100 × 100 cm. It holds the water and decorative gravel and provides a stable position for the pump on the patio.
The area reached by fine water droplets varies with the drop height, pump setting and the patio's exposure to wind.
An opening in the basin cover allows you to clean the pump, adjust the flow and check the water level.
Allow at least 60–80 cm of clear passage around the feature for easy movement and maintenance.
Leave a comfortable distance from lounge or dining furniture so you can enjoy the sound without unwanted splashes when the wind changes.
A fountain's effect depends first on its form within the space. Each design has a particular architectural role to play on the patio.
Simple geometry with a square basin. Water flows evenly over all four sides of the cube, creating a quiet centrepiece that can be enjoyed from any direction.
A tall form with a relatively shallow basin. It creates clear sightlines, defines terrace edges and reflects light vertically against walls or hedges.
Natural stone columns of different heights share an octagonal basin. Each water source can be adjusted individually, while the translucent stone creates a striking lighting effect after dusk.
Long formats from 100 to 400 cm define extended stretches of patio, separate planted areas and draw the eye along a calm line of water.
A flowing waterfall meets a reflective stainless steel bowl. The GRP reservoir is discreetly hidden within a powder-coated architectural enclosure.
A tall, slender marble body on a compact round basin. Its hollow construction, made from stone panels approximately 1 cm thick, reduces weight while retaining its sculptural presence.
Original Revisage models selected for their footprint, water flow and relationship to the surrounding terrace.
A mirror-polished V2A stainless steel cube with water flowing over all four sides and integrated LED lighting at the water outlet and beneath the body.
A pre-weathered Corten steel body with three adjustable water outlets and a flowing water surface that creates a vertical boundary on the patio.
Three tapered marble columns with separate water outlets stand in an octagonal natural stone basin. At night, the stone is illuminated from within and outside.
The product description states a weight of 200 kg. With the water fill and 75 kg of decorative gravel, allow for a total load of at least 350–400 kg on the patio foundation before finalising installation.
An elongated pre-weathered Corten steel trough with a distinctive curved stainless steel spout creates a horizontal boundary on spacious patios.
Explore this fountain →
A slender, honed Sölker marble body with a hollow construction made from natural stone panels approximately 1 cm thick. It weighs around 15% of an equivalent solid stone block.
* Catalogue images are illustrative. The individual veining of Styrian Sölker marble varies naturally.
A powder-coated waterfall body and stainless steel water bowl come together above a neatly enclosed GRP reservoir.
In a garden, the water reservoir is often buried in the soil. On a patio, the basin becomes a visible architectural base, or an enclosure keeps the tank above ground.
Examples: Stainless steel Cubus, Revolution, Meneurs.
The collecting basin forms part of the visible design. It stands directly on the patio surface, continues the fountain's material and holds all the circulating water above ground. No excavation is required.
Example: Mix waterfall and water bowl.
An industrial GRP tank (Ø 125 cm) sits inside a powder-coated architectural enclosure (Ø 130 cm). The equipment stays out of sight without digging a pit.
Example: In-ground fountains (such as Quad Garten).
The reservoir is buried beneath the lawn or gravel surface. Installing it on a finished patio would mean breaking through the surface or building a substantial raised structure, so this is not a patio model.
Water takes on the character of the material it flows across. The way a surface responds to light, planting and paving determines how naturally the feature sits within its outdoor setting over time.
Mirror-polished or finely brushed surfaces reflect the sky and surrounding architecture. Water forms a continuous, shimmering film that emphasises the clean geometry.
A warm, velvety rust patina contrasts with pale stone, timber decking and lush planting. Plan drainage edges carefully to account for the material's run-off on surrounding surfaces.
Austrian natural stone with distinctive reddish-grey bands. Its crystalline structure catches the daylight and glows warmly from within when illuminated by LEDs.
Architectural colours such as RAL 9005 Jet black or RAL 7000 Squirrel grey coordinate the water feature with window frames, railings or facade panels. The stainless steel bowl adds a bright focal point.
A slender column may need a surprisingly wide basin to catch splashes. A 400 cm trough also has a greater effect on movement across the patio than a 180 cm column.
| Model & version | Dimensions | Basin dimensions / footprint | Weight considerations | Best suited to |
|---|---|---|---|---|
| Stainless steel Cubus · Model 1 Most compact version | 35 × 35 cm · H 55 cm | 75 × 75 × 15 cm | Low empty weight; can be moved manually | Smaller patio areas and sheltered corners |
| Stainless steel Cubus · Model 4 Largest cube model | 80 × 80 cm · H 105 cm | 140 × 140 × 20 cm | High operating weight (large water volume) | Allow approximately 2.8 × 2.8 m including walking space |
| Meneurs · Model 1 Slender natural stone column | Column Ø 25 cm · H 140 cm | Basin Ø 60 cm | Around 15% of solid stone weight (hollow construction) | A vertical accent with a minimal footprint |
| Meneurs · Model 2 Large natural stone column | Column Ø 30 cm · H 160 cm | Basin Ø 75 cm | Reduced weight makes positioning on the patio easier | A strong sightline with a compact basin |
| Sölker marble Revolution Three columns of different heights | Columns 90 / 120 / 150 cm | Octagon Ø 120 cm · H 25 cm |
approx. 200 kg * |
A central feature needing viewing and walking space on all sides |
| Corten steel Trogbrunnen · 100 cm Compact rectangular trough | L 100 · W 50 · H 50 cm | Footprint 100 × 50 cm | Solid steel construction | A clear horizontal boundary along the edge of a space |
| Corten steel Trogbrunnen · 400 cm Longest trough version | L 400 · W 50 · H 50 cm | Footprint 400 × 50 cm | Very high combined water and feature weight (crane/pallet truck) | Defines a long sightline and divides patio areas |
In a garden, the sound of water carries over a distance. On a patio, you may sit just two metres from the basin. The volume, splashing and effect on conversation need to suit where you spend time.
Typical models: Cubus and Wasserwand TB.
Surface tension keeps the water close to the material as it flows quietly down. The gentle sound softens low background noise without interrupting conversation at the dining table. Even in a moderate breeze, the splash zone stays close to the basin.
Typical models: Trogbrunnen and Mix water bowl.
Water falls through the air into the collecting basin. The drop height and flow width create a full, fresh sound. With the patio door open, it also carries indoors. A distance of at least 1.5 to 2 metres from upholstered furniture is advisable.
Typical model: Revolution (3 columns).
A multi-way distributor lets you reduce or increase the flow at each outlet separately. Adjust the sound from a gentle trickle to a lively flow to suit conversation with guests or quieter moments.
The same fountain can have a very different effect depending on its position in relation to the building and the routes through the space.
Examples: Trogbrunnen or Wasserwand TB.
Defines the boundary with the garden while keeping the centre of the patio clear for movement. It screens private areas and provides a calm architectural frame.
Examples: Cubus or Revolution.
Creates an immediate focal point when you step onto the patio. Allow at least 80 cm of clear space on every side to walk around the feature and carry out maintenance.
Examples: Wasserwand TB or Meneurs.
Uses the wall as a backdrop. Projecting parts of the building offer shelter from gusts. Leave an access gap between the fountain and house to prevent trapped moisture and keep connections within reach.
Examples: Mix water bowl or Belle Combinaison.
Creates a natural transition from paving to planters or perennial borders, bringing a cooling effect and a pleasant microclimate close to lounge furniture.
A recirculating water feature can be installed neatly with careful planning. Check these ten practical requirements before choosing your model.
The combined weight of the feature, basin, water and decorative gravel can quickly reach 200 to 450 kg. The surface must be rigid, level and supported on a firm base so water flows evenly over the edges.
A basin measuring, for example, 100 × 100 cm also needs at least 60–80 cm of clearance from furniture and main walkways for comfortable access and maintenance.
Confirm whether your chosen model recirculates water in a visible basin, an enclosed GRP tank or a separate reservoir.
Revisage systems come with durable quality pumps and a 10 m power cable. Provide a weather-protected outdoor socket with residual current protection (RCD) at the installation site.
The pump, control valves and supply connections sit beneath access covers in the basin. Keep them clear of fixed furniture and heavy planters.
Recirculating systems also lose water through evaporation on hot summer days. Check the level regularly and top up with a garden hose or watering can.
Gusts can carry free-falling water or high bubbling jets beyond the basin. On exposed roof terraces, consider water flowing close to a solid body or a reduced flow setting.
Prepare the basin, pipes and pump for winter before the first frost, following the instructions for your model. Depending on the design, this includes draining the system and storing the pump somewhere frost-free.
The permitted load on a balcony or roof terrace depends on its construction. Have it checked in advance to confirm it can safely support the fountain, water, gravel and other uses of the space.
Check the clear width of garden gates, patio doors and any stairs. Heavy basins and columns arrive by freight delivery to the kerbside and must be moved safely to the installation position.
Patio fountains connect with other approaches to outdoor water design. Explore these guides for a closer look at each.
Clean architectural forms, simple geometry and sculptural monoliths for contemporary gardens and outdoor spaces.
Vertical water features in stainless steel, Corten steel and natural stone define boundaries and bring movement to walls.
From a single flowing waterfall to a stepped cascade, discover water movement and distinct layers of sound for outdoor spaces.
Compare compact centrepieces, vertical water walls, natural stone columns and linear basins by the effect they create on your patio.
